60.02EURO TVA INCLUSE 

 

MANUAL 

 

Digital display for measured temperature and set value
Selectable On-Off or time proportional control
Fe-Const thermocouple or NiCr-Ni thermocouple input
In the case of sensor failure, control output will be disable
Easy setting procedure
CE marked according to European Norms

 

 

Environmental Conditions 
Ambient/Storage Temperature 0...50 ºC / -25...70 ºC
Relative Humidity 80% relative humidity for temperatures up to 31°C, decreasing linearly to 50% at 40°C
Protection Degree According to EN 60529 Front panel: IP60, Rear panel: IP20
Height Max. 2000m
Electrical Characteristics 
Supply 230V AC +%10 -%20 or 24V AC ±%10, 50/60Hz or 9-30V DC / 7-24V AC ±%10 SMPS
Power Consumption 5VA
External Connections Plug-in terminals
Scale Fe-Const (J) thermocouple 0...400 °C
 NiCr-Ni (K) thermocouple 0...320 °C
Sensitivity 1 ºC
Accuracy For analog scale ±4% (of full scale)", for display scale ±0,5% (of full scale) or ±1 digit

Outputs 
Control Output Relay: 250V AC, 8A (for resistive load), NO+NC or 12V DC 20mA logic output
Life Expectancy Mechanical 30.000.000 operations (under no load), Electrical 300.000 operations (3A at 250V AC, resistive load)

Control 
Control Type Single-setpoint control
Control Algorithm On-Off (Xp=0) or time proportional control
A/D converter 10 bit
Proportional Band 2% (adjustable from the device)
Hysteresis 4 ºC (for On-Off control)

Housing 
Mounting Method Panel mounting
Dimensions W96xH96xD50 mm
Weight Approx. 250g (after packaging)
Enclosure Material Self extinguishing plastics

 

 

ATC9311 ANALOG THERMOSTAT with DIGITAL DISPLAY

294,09leiPreț

    Producător rezistente electrice

    Manufacturer of electrical resistors

    Program

    Lun - Vin: 08:30am - 17:00pm

    Sam-Dum : inc.

    Strada Sfantu Gheorghe

    Nr.20, Oras Pantelimon, Ilfov 077145 Romania

    © 2017~2020 by Caldor Industrial Heating Systems . Proudly created

    RO37290116 I J23/1295/2017